logo
Careers


IMT is located in Santa Barbara, California.  It is one of the most beautiful places in the world, nestled between miles of beaches and mountains that motivates you to enjoy an active lifestyle in the beautiful natural environment.

Working for IMT will be exhilarating as you will be interacting with the top professionals in the MEMS industry — providing a fast, aggressive, results-oriented work environment that allows employees to flourish. 

Be one of the team members, and contribute to manufacturing the most complex MEMS devices in the world.  We make MEMS work.

Please click on the appropriate links below to apply — include a cover letter and attach your current resume (text or Microsoft® Word) with the completed employment application form (also available in Adobe Acrobat version) to the human resources department.

IMT is an equal opportunity employer.

 
Positions


Vacuum Process Engineer

  • General Description
    • IMT is looking for a talented vacuum process engineer to sustain current production and lead the development of new processes. This includes ownership of DC/RF PVD, PECVD, LPCVD, and ICP dry etch equipment, control of the processes, running qualification wafers, monitoring equipment performance, and establishing reaction plans. Work will take place in IMT’s 150 mm class 100 production and development clean room in Santa Barbara, CA. No travel required
  • Detailed Job Duties
    • Daily process and sustaining engineering support for vacuum deposition and etch modules in Production and Development programs
    • Develop recipes for vacuum tools
    • Ownership of all vacuum equipment SPC (control charts) and on-demand review of chart alarms and corrective actions
    • Document and review operating and qualification procedures
    • Technician training
    • Match processes on multiple CVD tools
    • Create OCAPs, take lead on corrective actions/8D efforts
    • Implement cost reduction strategies and process improvements
    • Design, run, and report DOEs
    • Analyze statistical data with JMP
  • Work Experience, Education, and Physical Requirements
    • B.S. plus 5 years of industry experience or M.S. plus 2 years of industry experience or Ph.D. with/without industry experience (emphasis in vacuum deposition/etch preferred)
    • Degree in Electrical, Mechanical, Material Science, or Chemical Engineering
    • Detailed knowledge and hands-on experience using CVD and PVD tools
    • Experience with SPTS PECVD/DRIE/AOE, Veeco IBD/Ion mill/CVC, Tystar furnaces, and wafer bonders preferred
    • Very strong skills in SPC, 8D, FMEA, OCAPs and DOE
    • Strong documentation skills required
    • Demonstrated skills in problem solving
    • Self-directed with experience leading projects
    • Excellent communications skills (oral and written)
    • Experience in photolithography metrology is a plus
  • Job Code: 2014-VPE-10-01 [ Click to apply to this position ]


Mask Design Engineer

  • General Description
    • IMT is looking for a talented mask design engineer to lead IMT’s mask and reticle layout projects. The candidate(s) will be responsible for layout of a wide variety of devices for the entire production and research & development departments. Works with program managers and lead process engineers to generate reticle layouts, layer biasing, and reticle floor planning. This position provides the candidate enough challenges to improve and contribute his/her layout skills. Candidate should have thorough understanding of L-Edit and some knowledge of AutoCAD. Work will mainly take place in an office setting, but regular visits to IMT’s 150 mm class 100 production and development clean room will be required
  • Detailed Job Duties
    • Complete complex MEMS mask layout of customized devices using L-Edit to meet product delivery schedule, following established design rules
    • Perform design checks at each stage of design process of input files from process engineers or customers, and output files to process development and manufacturing teams
    • Review and interpret customer input documents and complete mask layout considering best practices for MEMS layout and fabrication, and product performance
    • Create design documentation using L-Edit, Word and Excel at each stage of design process to clearly communicate design output to process and assembly teams
    • Conduct design reviews
    • Work closely with Process Development, Manufacturing, and Test Engineering teams
    • Understand design process and work with team for improvements to the process, cycle time, and standardization
    • Inspect incoming masks and reticles
    • Manage third party mask manufacturers
    • Create project specific and company-wide design rules
    • Manage cleanroom mask/reticle library and storage areas, and online layout database
    • Develop and document streamlined mask submission procedure.
  • Work Experience, Education, and Physical Requirements
    • Master's in Electrical, Mechanical Engineering or related (Bachelor's with additional years design/L-Edit experience will be considered)
    • Minimum 3 year product design experience
    • Minimum 1 year L-Edit experience, fluent in Excel
    • Must have excellent organizational, verbal and written communication skills
    • Focused, self disciplined, multi tasking, and work well alone and in cross-functional teams
    • Knowledge of Micro-Electro-Mechanical Systems (MEMS) or semiconductor design or fabrication desired
    • Prior cleanroom experience also preferred.
  • Job Code: 2014-MDE-06-01 [ Click to apply to this position ]


Quality Assurance Inspector

  • Essential Responsibilities
    • Inspect wafers from various products
    • Fill out data maps and enter data in database
    • Receive and inspect materials
    • Create lots in Eyelit MES
  • Job Requirements
    • 2 years inspection experience in Clean Room environment desired
    • Ability to follow written instructions
    • Knowledge of MS Excel
    • Eyelit MES and Infinity software experience a plus
    • High school diploma or equivalent required
  • Job Code: 2014-QAI-14-01 [ Click to apply to this position ]


CMP and Slice Technician

  • General Description
    • Runs parts in IMT’s CMP and Slice equipment as described by processing instructions
    • Measures parts, uploads data into control charts, and writes comments to allow Engineering to address issues with wafers
  • Detailed Job Duties
    • Operation of wafer grinding tools, lapping tools, and its ancillaries
    • Operation of wafer dicing tools and its ancillaries for the singulation of whole or partial semiconductor substrates
    • Use of metrology equipment such as optical thickness measurement tools, microscope gages, zoom scopes, contact profilers
    • Use of ovens, washing sinks, substrate washing tools, and other tools common to microelectronics industry
    • Conduct equipment maintenance as needed (e.g., oil changes, lapping pad replacement, grinding wheel change outs, blade replacements)
    • Responsible for keeping work area clean (includes mopping and wiping tools/surfaces)
    • Responsible for complying with quality systems procedures as required
    • Be well organized and pay close attention to detail
    • Meets physical demands of the position including the ability to sit in one place for long periods of time, yet have the ability to change positions quickly as needed
    • Meet expectations for attendance, punctuality, and shift schedules
    • Performs other duties as may be assigned
    • Ability to focus for long periods of time
    • Ability to work without supervision
    • Basic computer skills, including basic knowledge of Microsoft Excel
    • Good fine motor skills
    • Good time management skills
    • Enthusiastic, dependable and motivated to provide quality performance
    • Must meet physical demands and pass substance abuse screening as may be required
  • Work Experience, Education, and Physical Requirements
    • Minimum of H.S. diploma or A.A. degree in electronics or manufacturing technology preferred
    • Excellent analytical, verbal and communication skills required
    • Computer skills with both non-windows and windows operating systems required
    • Flexibility to adapt to rapidly changing priorities and responsibilities
    • Hands-on participation and strong sense of ownership
    • Required to read and understand any pertinent training or departmental procedure manuals
    • Ability to work in fast paced, high volume production environment
    • Ability to work on all IMT shifts
  • Job Code: 2014-CMP/ST-05-01[ Click to apply to this position ]


Photolithography Process Engineer

  • General Description
    • IMT is looking for a talented photolithography process engineer to sustain current production and lead the development of new processes. This includes ownership of advanced steppers, mask aligner and coater track equipment, photo process control, qualification operations, equipment performance, and reaction plans. Work will take place in IMT’s 150 mm production and development cleanroom in Santa Barbara, CA. No travel required.
  • Detailed Job Duties
    • Process and sustaining engineering support for photolithography modules in Production and Development programs
    • Develop resist processes including creating recipes for coater track and stepper
    • Ownership of all photolithography SPC (control charts) and ppk performance improvement
    • Document procedures and train techs on stepper maintenance (after receiving OEM stepper training)
    • Match processes on multiple coaters and steppers
    • Create OCAPs, take lead on corrective actions/8D efforts
    • Implement cost reduction strategies and process improvements
    • Design, run, and report DOEs
    • Analyze statistical data with JMP
  • Work Experience, Education, and Physical Requirements
    • B.S. plus 5 years of industry experience or M.S. plus 2 years of industry experience or Ph.D. with/without industry experience
    • Degree in Electrical, Mechanical, Material Science, or Chemical Engineering
    • Detailed knowledge and hands-on experience using resists, aligners and metrology equipment required
    • Experience with i-line Nikon Steppers, Suss contact aligners, and SVG and TEL coaters preferred
    • Very strong skills in SPC, 8D, FMEA, OCAPs and DOE
    • Strong documentation skills required
    • Demonstrated skills in problem solving
    • Self directed with experience leading projects
    • Excellent communications skills (oral and written)
    • Experience in photolithography metrology is a plus
  • Job Code: 2014-PPE-06-01 [ Click to apply to this position ]


Production Technician - 3rd Shift Position

  • For 3rd shift (Fri, Sat, and Sun 3 x 12)
    • To begin with 1-3 months of training on 1st shift (M-TH 4 X 10)
    • Will need to be able to work any of the three shifts depending on the needs of the company
  • General Description
    • Gains specialized knowledge of all tools and processes in assigned bay(s)
    • Ensures tools and lots in assigned bay(s) are not idle, and all lots in assigned bay(s) are moving efficiently
    • Monitors real time status of all equipment in assigned bay
    • Utilizes Eyelit and communicates with engineering and maintenance to ensure issues with lots, processes, and tools are being addressed in assigned bay(s)
    • Maintains 5S protocol for assigned bay(s)
  • Detailed Job Duties
    • Production tech has ownership of assigned bay(s)
    • Position requires specialized knowledge of tools and processes run in assigned bay(s)
      • Redline all documentation (EOIs, Eyelit travelers, QAIs and MPIs) related to processes in assigned bay(s) to ensure compliance; and submit redlines to appropriate engineering personnel
      • Work with engineering to create new recipes for their bay(s), as required
      • Responsible for completing training matrix requirements for all tools and approved processes run in assigned bay(s)
    • Run all start ups and quals for tools in assigned bay(s) per assigned schedule
    • Run all production lots and released development lots in assigned bay(s) according to Eyelit or paper traveler instructions
      • Checks tool status in Eyelit before operating any tool
      • Correctly tracks lots through Eyelit or paper travelers in real time
      • Processes materials according to engineering change order (ECO) instructions
      • Responsible for productivity in assigned aisle
      • Lots will be run first in, first out (FIFO) unless otherwise instructed by Eyelit priority
      • Communicate tool availability to engineers for engineering only processes
      • Perform inspections according to QAIs
        • QAI must be displayed on monitor during inspections
        • Fills out Discrepancy Report (DR) form when processes do not match AQI requirements and places lot on DR hold in Eyelit with appropriate comments
      • Ensures 5S cleanliness and organization of bay(s) at shift start and shift end
      • Flexibility between bays is required, depending on work load
      • Multitasking of various job responsibilities within assigned bay(s)
      • Uses vacuum wands where available
    • Administrative responsibilities
      • Works assigned schedule
      • All overtime must be approved in advance by the shift supervisor
      • Coordinates breaks and meals with shift supervisor and backup technician to ensure tools are monitored and aren’t left idle
      • Fills out Time Track daily
      • Answers the phone in assigned bay(s)
      • Arranges all PTO 1 week in advance with supervisor
  • Work Experience, Education, and Physical Requirements
    • AA degree or other technical degree is desired OR High School diploma plus two years of experience in MEMS fabrication
    • Background in semiconductor processing is preferred, including familiarity in photolithography, wet etching, thin film deposition, and dry etch technology
    • Must have excellent written, verbal communication and computer skills
    • Detail oriented and self motivated
    • Must be able to stand/walk for long periods of time and carry up to 15 lbs.
    • Work environment: Clean room and office environment
    • Computer literate: Word, Excel, Outlook, etc.
  • Job Code: 2014-PT-16-01 [ Click to apply to this position ]


Quality Assurance Technician - 2nd Shift Position

  • For 2nd shift position (4:30pm - 3:00am) with 4 month training on 1st shift (8:00am - 5:00pm)
  • General Description
    • Responsible for inspecting and verifying wafer conformance to specifications
    • Receive and inspect incoming raw materials for compliance to specification
    • Package and ship wafers
    • Perform process audits and environmental testing in the clean room.
  • Detailed Job Duties
    • Inspect and measure wafers from various products in clean room environment
    • Upload data to Infinity and Eyelit databases
    • Maintain inspection records and history files
    • Receive and verify raw materials
    • Audit processes as required
    • Review wafer data to specification, package and ship wafer
    • Perform environmental testing in clean room
  • Work Experience, Education, and Physical Requirements 
    • 1 –3 years experience in Clean Room manufacturing desired
    • Good knowledge of interpreting, revising and improving written instructions
    • Some knowledge or experience in Quality procedures required such as Statistical Process Control (SPC) and ISO 9001
    • Knowledge of MS Excel and good network navigation skills required
    • High school diploma required, AA degree preferred
    • Must be able to don and wear Personal Protective Equipment as required
  • Job Code: 2014-QAT-14-01 [ Click to apply to this position ]


Go Back To Top